European public procurement and grants data from official registers · Data as of 17 November 2026; updated daily.

Tenders

Mining machinery tenders in France

Mining machinery tenders in France: 71 listed on GranTender since 2024; none is open now. Buyers with the most tenders: CNRS Délégation Régionale Hauts-de-France (10), Ifremer (9) and MINARM/AIR/SIAé (Ministère des Armées) (3); suppliers with the most contract awards: D Hantsch (4), Kässbohrer Ese SAS (3) and PEDERSEN Carbure & Diamant (3). Sources: DECP, BOAMP and TED. Since 2024 the median contract value was €120,000; 36% of contracts drew a single bid (3.2 bids on average). Data as of 17 November 2026; updated daily.

Tenders
71
Open tenders
0
Awards
70
Awarded value awarded
€3,090,385
Awarded value contract
€11,082,412
Awarded value framework ceiling
€15,393
Median contract value contract
≈ €120,000
Median contract value awarded
≈ €430,000
Average bids per contract
3.2
Tenders in 2025
26 -7% on 2024

Median: contracts with a stated value, rounded. Average bids: contracts where the number of bids is published.

Value kinds: awarded — the value in the award decision; contract — the value of the signed or amended contract; paid — the amount actually paid; framework ceiling — the maximum of a framework agreement, given with every winner, not money spent. Different kinds are never added together.

Open tenders

No records yet.

Latest tenders

TenderBuyerEstimated valueStatusPublished
Fourniture de deux rectifieuses cylindriques à commande numérique (CN) de précision au profit du groupe Usinage de l'Atelier industriel de l'aéronautique de BordeauxMINARM/AIR/SIAé (Ministère des Armées)—Closed1 October 2026
Fourniture de pièces, entretien, réparation des équipements du centre de tri et divers. Lots 2, 4 et 5Smitred Ouest d'Armor—Closed2 August 2026
VERIFICATION, FOURNITURE ET POSE DE MATERIAUX POUR L’ENTRETIEN DES INSTALLATIONS PORTUAIRES MARITIMES ET SOUS-MARINESCommune de Combrit—Awarded17 July 2026
FOURNITURE D'UN CRIBLEUR A TROMMEL SUR CHENILLESEtablissement Public du Château, du Musée et domaine national de Versailles—Closed9 June 2026
L'acquisition d'un planeur sous-marin et capteurs dans le cadre du projet "Mission 6".CNRS Délégation Régionale Hauts-de-France—Awarded12 May 2026
Fourniture de kits d’aide à l’enfouissement de mines (KAEM) et prestations associéesDirection Générale de l'Armement / DOMN / Service des Achats d'Armement—Closed3 April 2026
Aménagement et rénovation à haute performance énergétique du bâtiment administratif GAMBETTA - Lot 02 CUVELAGEConseil Departemental du Calvados (CD 14)—Awarded1 April 2026
Achat d'un planeur sous-marin et capteurs dans le cadre du projet "Mission 6"CNRS Délégation Régionale Hauts-de-France€480,000Awarded27 March 2026
DIJON METROPOLE - Fourniture et installation de 4x8 modules de catalyseurs pour le traitement SCR des dioxines et des oxydes d'azote sur les fumées issues de l'incinération des déchets ménagers et assimilés des lignes 1 et 2Dijon métropole—Awarded15 March 2026
Fourniture d’articles destinés à l’entretien du patrimoine communal et communautaire – Relance du lot 15 : Produits de métallurgieBrest métropole—Awarded14 March 2026
DESSERTE EN EAU POTABLE PLAINE DE PASSYCommune de Passy—Awarded5 January 2026
Machine de coulée sous vide à induction automatique avec surpression (neuf)Université Grenoble Alpes—Awarded11 December 2025
ACQUISITION DE MATERIELS POUR LA CONSTRUCTION LOT 9 PRODUITS DE LA METALLURGIEVille d'Antibes (06)—Awarded28 November 2025
Développement et réalisation de véhicules autonomes sous-marins (AUV) dotés d'un sonar multi-aspects pour le programme « système de lutte anti mines futur » (SLAMF) au profit de la Marine nationale, réalisation du maintien en condition opérationnelle (MCO) et de prestations associées.Direction Générale de l'Armement / DOMN / Service des Achats d'Armement—Awarded20 October 2025
La présente consultation a pour objet les travaux de récupération d’Hélium pour le compte du laboratoire CBM. - Conception & Installation des réseaux d’hélium gazeuxCNRS Délégation Régionale Hauts-de-France—Awarded18 September 2025
Fourniture, livraison et mise en service d'un crible neuf à étoile à trois fractions avec prestation d'entretien (full service)SMEDAR - Syndicat Mixte d'Elimination des Déchets de l'Arrondissement de Rouen€540,000Awarded30 July 2025
CONCEPTION ET REALISATION D'UN DISPOSITIF DE FABRICATION ADDITIVE PAR FUSION LOCALE DE LIT DE POUDRE PAR FAISCEAU LASER COMPATIBLE AVEC LA TOMOGRAPHIE SYNCHROTRONCNRS Délégation Régionale Hauts-de-France€250,000Closed17 July 2025
25RPP142_Acquisition de matériel de lutte contre les pollutions dans les ports de plaisance_Relance du lot 1 : Acquisition de matériels antipollutionCommunauté d'Agglomération Territoire de la Côte Ouest (974)—Closed23 June 2025
Fourniture de matériels de raccordement et d'unités centrales de gestion compatibles avec le système de pilotage intelligent - Marché complémentaire.Ville de Pau—Awarded4 June 2025
FOURNITURE MOULES INJECTION PLASTIQUE ET PALETTE EN INJECTION POLYMERE COMPOSES DE PP RECYCLE ET DE BROYATS DE BILLETSBanque de France€480,000Closed13 May 2025

Competition and prices

Since 2024, half of the contracts were worth between €52,000 and €260,000, with a median of €120,000 (43 contracts with a stated contract value). Contracts drew 3.2 bids on average (median 2) and 36% drew a single bid — based on 45 contracts with a known number of bids. The usual procedures: open procedure (59%), negotiated procedure (22%), negotiation without a call for competition (7%) — of 27 tenders with a stated procedure.

The most contracts went to D Hantsch (4), Kässbohrer Ese SAS (3) and PEDERSEN Carbure & Diamant (3) — together 14% of all contracts.

YearContractsMedian valueMiddle half of valuesBids on averageSingle bid
All years70€120,000 (contract value)€52,000 – €260,0003.236% (45)

Values: contracts with a stated value in EUR, each value kind on its own (awarded or contract value), approximate (±3 %). Bids: contracts of procedures with competition whose number of bids the source publishes (1–100 bids); the sources publish it for some contracts only (TED ≈ 3 in 4, Spain all, Poland about half, Italy few), so each figure states its base and is shown from 20 contracts. A contract counts in the year of its award (else of its tender). Figures as of 13 November 2026, recomputed every week.

Where you have a chance

Since 1 November 2024, 34% of the 35 contracts with a known number of bids had a single bid; the median was 2 bids. The number of bids is known for 35 of the 45 contracts from procedures with competition.

Buyers who often get few offers

The buyers below usually received one or two offers per contract — an offer from you would stand out.

BuyerContracts with known bidsMedian bidsSingle bid
CNRS Délégation Régionale Hauts-de-France6150%

Contracts awarded since 1 November 2024 (the last 24 months). Bids as the source publishes them, 1 to 100 per contract, in procedures with competition only (a direct award has one offer by design). As of 13 November 2026.

Main CPV divisions

CPV codes of this topic

  • 43100000 Mining equipment
  • 43400000 Mineral-processing and foundry mould-forming machinery
  • 43610000 Parts for boring machinery
  • 43620000 Parts of mineral-processing machinery
  • 43630000 Parts of sinking machinery
  • 43700000 Machinery for metallurgy and associated parts

A tender belongs here when its main CPV code starts with one of these codes; a tender without a usable CPV code (or with a general one) is matched by words of its title. A tender may belong to up to three topics.

Mining, drilling and crushing machinery in neighbouring countries

Today, 2 tenders in the same niche are open in neighbouring countries.

Public tenders in the EU and the EEA are open to companies from every EU and EEA country on the same terms as local ones, and to companies from countries with a procurement agreement with the EU (such as Switzerland, the United Kingdom and Ukraine) for the contracts it covers. Open means the deadline has not passed (today's date). Neighbours: countries with a land border, a fixed link or a short sea crossing.

Market reports

Mining, drilling and crushing machinery by city

Mining, drilling and crushing machinery in other countries

Mining, drilling and crushing machinery across Europe

Topics in Machinery, equipment, repair and installation

Questions and answers

Which mining machinery tenders in France are open now?
None is open at the moment; GranTender lists 71 in total.
Where can I find mining machinery tenders in France?
GranTender lists them in one place, from DECP, BOAMP and TED, with their buyers, winners and contract values; 0 are open now. Search in one country at a time (the first 5 results) is free; search across all countries at once, full result lists, saved keywords with an e-mail once a week and exports come with a plan.
Who wins the most mining machinery tenders in France?
By number of contracts won: D Hantsch (4), Kässbohrer Ese SAS (3), PEDERSEN Carbure & Diamant (3).
Which buyers publish the most mining machinery tenders in France?
By number of tenders: CNRS Délégation Régionale Hauts-de-France (10), Ifremer (9), MINARM/AIR/SIAé (Ministère des Armées) (3).
Which CPV codes belong to “Mining, drilling and crushing machinery”?
43100000 Mining equipment; 43400000 Mineral-processing and foundry mould-forming machinery; 43610000 Parts for boring machinery; 43620000 Parts of mineral-processing machinery; 43630000 Parts of sinking machinery; 43700000 Machinery for metallurgy and associated parts; plus tenders without a usable CPV code whose title names the topic.
How many bids do mining machinery tenders in France receive on average?
Since 2024, contracts drew 3.2 bids on average (median 2) and 36% drew a single bid — based on 45 contracts with a known number of bids.
How much are contracts for mining machinery tenders in France worth?
Since 2024, half of the contracts were worth between €52,000 and €260,000, with a median of €120,000 (43 contracts with a stated contract value).
Which procedures are used for mining machinery tenders in France?
The usual procedures: open procedure (59%), negotiated procedure (22%), negotiation without a call for competition (7%) — of 27 tenders with a stated procedure.
Which buyers get few offers in mining machinery tenders in France?
Since 1 November 2024, these buyers usually received one or two offers per contract: CNRS Délégation Régionale Hauts-de-France (median 1 bid over 6 contracts). Since 1 November 2024, 34% of the 35 contracts with a known number of bids had a single bid; the median was 2 bids.

CPV 2008 (Regulation (EC) No 213/2008), © European Union, Publications Office — via the eForms SDK, CC BY 4.0.